LONG BOX COOLERS * Capable of keeping ICE for more than 2 WEEKS! (results will vary depending on size and conditions, please check prep sheet for model expectations) * Made of the most durable polyethylene plastic available creating a Bomber Cooler! * This is the same plastic used in playground equipment, commercial gear and is food safe, FDA approved . This plastic does not absorb odors or stain! * Superior ice retention obtained by pressure injecting CFC free, premium polyurethane insulation in the entire body and the LID of the cooler. * This process also makes the box and lid solid as a rock! Ready for sitting, standing and supporting heavy items for long periods of time with no damage to the cooler. * Also capable of keeping food and drinks hot, Great for F&B, catering, BBQ. * Heavy-duty hinges welded and screwed into metal backing inside the cooler and lid. * Extra strips of polye on the bottom for a long life, handles/tie-downs on each end, rope handles for ease in lifting and lowering, custom drain plugs & more.

Model

L1

L2

L3

W1

W2

W3

H1

H2

IDL

IDW

IDH

CAP

WT

Price MSRP

50LONG

28½

28½

27½

14

13

12¾

13½

10½

25

10¾

10

46.6

20

$180

70LONG

31½

31½

31

15¾

14¾

14½

14½

10½

28¼

13

10½

66.7

22

$210

115LONG

36

34½

33½

18

17

16¾

19¼

15½

30½

14¼

15½

116.7

29

$310

150LONG

40

38

37½

20½

19½

19¼

19½

15½

33¾

16¼

15¾

149.0

35

$420

220LONG

43¼

43

42½

25¼

24

24

25¾

21½

39

21¼

19½

279.8

57

$540

700 LONG

80

31

30

700

90

$999

	L1 is the longest part of the cooler, end to end. On premium includes molded handles at each end.
	L2 includes the plastic handles on each end, they are ¾ inch thick each, for the cooler body width at this point subtract the handles. On premium just below molded handles.
	L3 includes one drain plug on one end, it is 1 inch thick, if your cooler has two plugs add another inch.
	W1 the widest part of the cooler, front to back, it does not include the latches, ½ inch, or the hinges, ¾ inch thick, if your cooler will have these add for actual width.
	W2 is the width below the top widest point, usually 1 inch less then W1.
	W3 is the bottom of the cooler, there is a slight taper from W2 to W3.
	H1 is the total Height
	H2 is the bottom of W1 to the ground.
	ID is the inside dimensions.
	CAP is the inside cubic inches, with the lid closed, converted to liquid volume quarts.
	All measurements were rounded up to the nearest 1/8 inch, the nearest pound and the next quart.

Home | Products | Kool Info | Contact

e-mail: info@icee-kool.com