Home | Products | Kool Info | Contact

 

CUBE STYLE COOLERS


* Capable of keeping ICE for more than 2 WEEKS!
(results will vary depending on size and conditions, please check prep sheet for model expectations)
* Made of the most durable polyethylene plastic available creating a Bomber Cooler!
* This is the same plastic used in playground equipment, commercial gear and is food safe, FDA approved . This plastic does not absorb odors or stain!
* Superior ice retention obtained by pressure injecting CFC free, premium polyurethane insulation in the entire body and the LID of the cooler.
* This process also makes the box and lid solid as a rock! Ready for sitting, standing and supporting heavy items for long periods of time with no damage to the cooler.
* Also capable of keeping food and drinks hot, Great for F&B, catering, BBQ.
* Heavy-duty hinges welded and screwed into metal backing inside the cooler and lid.
* Extra strips of polye on the bottom for a long life, handles/tie-downs on each end, rope handles for ease in lifting and lowering, custom drain plugs & more.
Model
L1
L2
L3
W1
W2
W3
H1
H2
IDL
IDW
IDH
CAP
WT
Price
60CUBE
23
22
21
17
15½
15¼
18¾
14¼
18
13½
14
58.9
20
$180
80CUBE
27½
26¼
24½
18
17
16¾
19
15¼
22½
14¾
14¼
80.9
24
$220
100CUBE
28
26¾
27½
18¼
17¼
17
22½
16¾
23
14¾
16
93.9
28
$250
120CUBE
30¾
29½
29
19¾
18¾
18½
22
18¼
26¼
15¾
17¼
123.4
31
$280
160CUBE
34
22
28
160.0
35
$320
180CUBE
38
22
26
180.0
40
$380
200CUBE
37¼
36
36½
22¾
22¼
22
24½
21¾
31¼
18¾
19
192.7
48
$420
300 CUBE
41
27
31
300
64
$540
L1 is the longest part of the cooler, end to end. On premium includes molded handles at each end.
L2 includes the plastic handles on each end, they are ¾ inch thick each, for the cooler body width at this point subtract the handles. On premium just below molded handles.
L3 includes one drain plug on one end, it is 1 inch thick, if your cooler has two plugs add another inch.
W1 the widest part of the cooler, front to back, it does not include the latches, ½ inch, or the hinges, ¾ inch thick, if your cooler will have these add for actual width.
W2 is the width below the top widest point, usually 1 inch less then W1.
W3 is the bottom of the cooler, there is a slight taper from W2 to W3.
H1 is the total Height
H2 is the bottom of W1 to the ground.
ID is the inside dimensions.
CAP is the inside cubic inches, with the lid closed, converted to liquid volume quarts.
All measurements were rounded up to the nearest 1/8 inch, the nearest pound and the next quart.
Home | Products | Kool Info | Contact
© 2006 Icee-Kool, LLC. All Rights Rights Reserved - Another Cool Site by Puamana Web Design